
The technology is your risk, not the homeowner’s
When the WiFi drops in the primary suite eighteen months after closing, the homeowner does not call the low-voltage sub. They call you. When the family cannot work the theater on the first weekend, that is your handover they are unhappy with, on a house that is otherwise perfect.
Most of those calls trace back to the same two things: a network that was treated as an afterthought, and three different vendors who each did their piece correctly and never spoke to each other.
What we actually take off your plate
One contractor for the whole low-voltage package. Structured cabling, network design and WiFi, cameras, access control, audio, theater and control. One schedule to coordinate, one number to call, one company accountable when something needs sorting.
Line voltage and low voltage under one license. We are a Florida licensed electrical contractor, EC13014608, which most technology integrators are not. Lighting control, keypads, motorized shade power and panel work are line voltage, so an integrator without a license has to sub every bit of it to an electrician. That is another trade to schedule, another markup, and another seam where a problem becomes an argument about whose problem it is. On our jobs the line voltage, the low voltage, the network and the AV are the same contractor.
Pre-wire done once, properly. We walk the plans before framing and mark up what should be roughed in. Everything gets pulled, terminated, labeled and tested, and you get the documentation. Adding a run after drywall costs roughly ten times what it costs before, and that conversation always happens in front of the homeowner.
A network designed rather than assumed. This is where most custom homes fail. Forty-plus connected devices, cameras and guest WiFi flat on one subnet, access points placed wherever there happened to be a stud. We design it the way we design a commercial network, because that is the other half of our business.
Support after you hand over the keys. Documented, labeled, and covered by ongoing monitoring if the homeowner wants it. The point is that in year two they call us, not you.
We are an IT company that does AV
That order matters. Plenty of firms can hang speakers and program a scene. Far fewer can put in a network that still works when the house is full of guests, the cameras are recording, four TVs are streaming and somebody is on a video call from the back bedroom.
We run managed IT for businesses across Brevard, with monitoring, segmented networks and documented racks as routine. A custom home gets the same discipline. We are a UniFi Certified Partner, and you can verify that in Ubiquiti’s own installer directory rather than taking our word for it.
Recent ground-up work includes a full low-voltage buildout for a new senior living community: a building-to-building fiber backbone, a UniFi network core, structured cabling throughout and property-wide cameras, coordinated with the general contractor from bare ground. The same package scales down to a single custom residence.
What we rough in, and when
A rough guide to what should be in the wall before insulation. We will produce a marked-up version for your specific plan set, at no charge and with no obligation.
- Cat6 to every TV location, plus a spare, and to every desk and office wall
- Cat6 to each planned access point, ceiling mounted and central, not in a corner
- Cat6 to every camera position, including the ones the homeowner has not asked for yet
- Conduit from the rack to the attic and to the crawl or slab, so future changes do not mean drywall
- Speaker wire to ceilings, the lanai and the pool deck, terminated and capped
- A properly sized, ventilated rack location with power and a dedicated circuit
- Doorbell, gate and garage low-voltage runs back to the same rack
- Conduit to the pool equipment pad and any detached structure
The single most common regret we hear is conduit that was not run. It is the cheapest thing on this list and the only one that buys back every decision made after move-in.
Where we work
Brevard County and the Space Coast as standard: Melbourne, Palm Bay, Viera, Suntree, Baytree, Rockledge, Merritt Island, Indialantic, Melbourne Beach, Satellite Beach, Cocoa Beach and Titusville. We take commercial and larger residential work further afield across Florida, including Indian River County.
Questions builders ask
Send Us a Plan Set
We will mark up the low-voltage rough-in and come back with a budget range, at no charge. If we are not the right fit for the specification we will say so. Call (321) 655-7767 or send the plans and we will take it from there.
- Local Brevard County company
- ★★★★★ Hundreds of five-star Google reviews
- Licensed, insured & veteran-owned
- Same-day & next-day availability