Professional Home Security Camera Installation
Most homeowners start with a Ring or Arlo camera and quickly run into the same frustrations: blurry 1080p footage that misses license plates, a monthly subscription fee that never ends, cloud storage you have no control over, and cameras that miss half the property because placement was guesswork. The Electpros install UniFi camera systems that are in a different class entirely.
UniFi cameras by Ubiquiti deliver genuine 4K resolution, smart motion detection with configurable zones, and local NVR storage with no monthly fees, ever. Your footage lives on hardware in your home. You own it, you control it, and you access it anytime from the Unifi Protect app on your iPhone or Android. As a UniFi authorized partner, The Electpros design and install these systems for Brevard County homeowners who want real security rather than the illusion of it.
- 4K resolution captures faces, license plates, and fine detail at distance
- Local NVR storage, no cloud subscription fees required
- UniFi Protect app for live view, playback, and motion alerts on your phone
- Smart detection zones that reduce false alerts
- Scales from 2 cameras to 20+ on the same system
- UniFi authorized partner installation for full warranty coverage
Camera Placement Strategy
Where a camera is mounted determines everything about what it captures. An improperly placed camera pointing at the sky or mounted too high to read a face provides false confidence, not real security. Before we install a single camera, The Electpros walk your entire property to map coverage requirements and identify blind spots.
We plan camera positions to cover every entry point, all driveways and approaches, carport and garage areas, and any additional areas you want monitored. We account for the correct height and angle to capture usable facial recognition detail and license plate numbers. When we are done, there are no gaps in coverage and no wasted cameras pointing at irrelevant areas.
- Full property walkthrough before any installation begins
- Coverage mapped for every entry point and access route
- Camera height and angle optimized for face and license plate capture
- Blind spot identification and elimination
- Driveway, garage, gate, and perimeter coverage planned
- Written camera placement plan provided before installation day
Clean PoE Installation
Power over Ethernet is the right way to wire security cameras. A single Cat6 cable carries both power and data to each camera, which means no separate power outlets at each camera location, no visible power adapters, and a single clean cable run from the camera back to the NVR and PoE switch. It is the professional standard for a reason.
The Electpros route every camera cable through the soffit, attic, or interior wall cavities so nothing is visible on the exterior of your home. We use weatherproof outdoor mounting hardware and properly seal every penetration point to keep water out. When we leave, the system looks like it was built into the house, not stapled to the outside of it.
- Cat6 PoE runs from each camera back to the NVR, no separate power needed
- Attic and soffit routing to eliminate visible exterior cable runs
- Weatherproof outdoor camera mounting hardware for Florida conditions
- All exterior penetrations sealed and weatherproofed
- Cable labeled and organized at the NVR for clean rack presentation
- Looks like a purpose-built install, not a DIY retrofit
UniFi NVR Setup and Remote Access
The NVR, or Network Video Recorder, is the brain of your camera system. It stores your footage locally on a hard drive in your home, manages all cameras, and provides the intelligence behind smart motion detection and alerts. The Electpros configure the entire NVR: camera adoption, storage allocation, retention settings, motion detection zones, alert thresholds, and user accounts.
Remote access is set up and tested before we leave. The Unifi Protect app gives you live view of every camera, the ability to review recorded footage, motion event history, and push alerts to your phone when something triggers detection. Everything is configured and working on your phone before we close our tool bags.
- UniFi NVR installation and camera adoption
- Local hard drive storage with custom retention settings
- Smart motion detection zone configuration for each camera
- Alert tuning to reduce false notifications
- Unifi Protect app setup and testing on your iPhone or Android
- Live view, playback, and event history configured and verified before we leave
No Monthly Fees, Ever
Ring, Arlo, Nest, and most consumer camera systems charge between $10 and $20 per month just to access your own recorded footage. Over five years, that is $600 to $1,200 paid to a company to store video on their servers, video that can be deleted, withheld in a data breach, or made inaccessible the moment you miss a payment.
UniFi stores everything locally on your NVR. Your footage is yours, stored in your home, accessible from anywhere through the Unifi Protect app with no subscription required. The Electpros install the system once. After that, there are no recurring fees, no cloud dependencies, and no third party between you and your own security footage.
- Zero monthly subscription fees, footage stored on your local NVR
- No cloud dependency, system works even without internet access
- Your footage is private and under your control at all times
- One-time professional installation cost, no recurring charges
- System scales easily by adding cameras and storage as needed
- 200+ five-star reviews from Brevard County homeowners
Book Your Security Camera Installation
Serving Melbourne, Palm Bay, Viera, Cocoa Beach, Titusville, and all of Brevard County. Call (321) 655-PROS or book online.
- Local Brevard County company
- ★★★★★ 200+ five-star Google reviews
- Licensed, insured & veteran-owned
- Same-day & next-day availability